What Have YOU Done To Your Truck Today?
#7576
Josh, that camper is friggin outta sight man! Looks great with that slick truck of yours.
All I have been doing with mine is driving it. A lot. Like 70 miles a day a lot. It has been kicking names and takin' *** the whole time. She isn't wild about the heat, and the 110º air will make her ping if I am too deep in the secondaries going up a long steep hill. Under 100º it is fine though.
All I have been doing with mine is driving it. A lot. Like 70 miles a day a lot. It has been kicking names and takin' *** the whole time. She isn't wild about the heat, and the 110º air will make her ping if I am too deep in the secondaries going up a long steep hill. Under 100º it is fine though.
#7578
All I have been doing with mine is driving it. A lot. Like 70 miles a day a lot. It has been kicking names and takin' *** the whole time. She isn't wild about the heat, and the 110º air will make her ping if I am too deep in the secondaries going up a long steep hill. Under 100º it is fine though.
#7579
I have gotten pretty used to it. I'm a window kinda guy anyway. 118º, windows down, life is good. As long as I am moving, the heat doesn't bother me. Sitting still is what does it!
#7580
After I changed the cam that ate it's self, I was running the 30 minute break in at 2000 RPM. After 20 minutes into it, the temp started climbing. I shut it off. Not even two seconds later, the bottom radiator hose blows off and coolant empties all over my drive way. This is my luck. Fix one problem, another problem shows it's ugly face. Here's pics of the old cam. Btw, this cam has less than 5k miles and Comp told me "Sorry, the cam is older than 12 months. No warranty. No matter how many miles are on it."
It's a little hard to tell but there is a little over 1/8" ground off the lifter and a little less off the cam. I think I can blame the fresh oil that I put into it on this one. No zinc at all. Lesson learned, always add zinc additive.
It's a little hard to tell but there is a little over 1/8" ground off the lifter and a little less off the cam. I think I can blame the fresh oil that I put into it on this one. No zinc at all. Lesson learned, always add zinc additive.
#7581
#7582
#7583
#7584
#7585
#7586
Have you even checked the vendors at the top of this page? Bronco Graveyard, MACS, Blue oval truck parts, Dennis carpenter, NPD (National Parts Depot. Rock Auto.
You need to cruise the Parts Vendors & Resources https://www.ford-trucks.com/forums/1...l#post14955960
You need to cruise the Parts Vendors & Resources https://www.ford-trucks.com/forums/1...l#post14955960
#7588