When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installed new front drive shaft, change auto trans filter what a dick of
a job!! was my 1st time, tranny fluid everywhere was laying in a pool of it
be easier next time I welded a drain bung in the pan
next is diff covers with drain plugs & steering block to suit my SJ 4" lift!!!
Installed a trackbar, bled the brakes, and took it for a quick drive... no more shakes, the brakes work, and it doesn't pull at all! Although the steering wheel is 180 out...
Finally got the factory steering wheel installed.Well it is from a different year & about 1-2 inches smaller in diameter but it is Perfect, Has the soft foam wrap instead of the hard Plastic.
Haha! in case you are wondering its part of the duct assy under the induction scoop that will connect to my sealed air cleaner housing. It is surface rusty and needs some finishing. The waxy brown stuff is rustproofing that leaked off the underside of the scoop and hardened, will scrape off later on.
Gave the "OK" to the Performance Shop to rebuild the 360. Should have a "new" engine in two to three weeks. Too bad the truck won't be ready for it by then.