6.0 misfire
Thread Starter
|
Posting Guru
Joined: Feb 2009
Posts: 1,040
Likes: 0
From: Jackson
6.0 misfire
Hello everybody, I have an 04 f250 with a 6.0 psd, when it was cold it run with a miss, after it warmed up it was fine, never got the ficm updated yet,but now miss got worse, it is all the time even after truck warms up, possible injector?? or can it be a ficm issue?? any info would be great, I have an otc genysis, can i run an injector test with it? Thanks 
Thread Starter
|
Posting Guru
Joined: Feb 2009
Posts: 1,040
Likes: 0
From: Jackson
Did you change all injectors? or had to change the ones that were bad? did you go to a dealer or regular shop? Did they have to reprogram your computer after they changed injectors?
Junior User
Joined: Apr 2009
Posts: 86
Likes: 0
From: Elmira New York
Just changed the ones that were bad. They also did the E015 recall that replaced the exhaust back pressure sensor. It was done at the dealership. I bought a ford esp extra care warranty and it took care of all of it. Part of that recall was to reprogram the pcm if needed. They did not need to as it already had the lasted software
Thread
Thread Starter
Forum
Replies
Last Post
