Front Bumper Swap
Thread Starter
|
New User
Joined: Dec 2005
Posts: 10
Likes: 0
Front Bumper Swap
Looking at putting a newer bumper with fog lights built in onto my 2000 Ex that doesnt have the foglights.
Any difference in mounting or anything if I get a newer one with the proper valance cut out for the fog lights? I will just have to wire in the fog light switch.
Any difference in mounting or anything if I get a newer one with the proper valance cut out for the fog lights? I will just have to wire in the fog light switch.
More Turbo
Joined: Oct 2008
Posts: 657
Likes: 4
From: Pueblo, CO
Not sure about adding the wiring (mine was already wired for it), but I just trimmed my valence to clear the foglamps. I used a valence off of a 2000 like yours (swapped from tan to black trim). Carefully cut it with a razor knife.
If you want a 2002 plastic valence with the clearance, I have one in tan... ?
If you want a 2002 plastic valence with the clearance, I have one in tan... ?
Thread
Thread Starter
Forum
Replies
Last Post
