So much for those posts!
Thread Starter
|
New User
Joined: Apr 2000
Posts: 3
Likes: 0
So much for those posts!
Man can you believe that, neither one of my posts are working!
Anyway, I took spark plugs out and changed them today noticed that one of the plugs was oil fouled.. so much for that engine I guess.. Anyone care to give me some hope for it by saying it could be something other than rings?
-Adam
Anyway, I took spark plugs out and changed them today noticed that one of the plugs was oil fouled.. so much for that engine I guess.. Anyone care to give me some hope for it by saying it could be something other than rings?
-Adam
Tuned
Joined: Apr 2000
Posts: 393
Likes: 3
From: Merrill
So much for those posts!
could be valve seals, intake manifold sucking oil, pvc sucking oil in to intake, etc.
Scott
mickelsons(No Email Addresses In Posts!)
'98 Contour
'78 F-250 4X4 SC
'69 F-250 4X2
'52 International L-110
I would rather push a Ford than drive a chevy. (like you would have to push a ford. HA)
Scott
mickelsons(No Email Addresses In Posts!)
'98 Contour
'78 F-250 4X4 SC
'69 F-250 4X2
'52 International L-110
I would rather push a Ford than drive a chevy. (like you would have to push a ford. HA)
Senior User
Joined: Jan 2000
Posts: 103
Likes: 0
So much for those posts!
Don't dispare and throw the baby out with the bath water. Just because one plug is fouled dosn't mean the engine is shot. I've been driving my " 77 , 460 with and oilie nr3 plug for over two years now and the only inconvience is that it needs to be cleaned every once in awhile when it start missing. I can deal with this until I have the time to change the seals and if that isn't the problem then the valves and rings next. Start with the inexpensive cures first and then keep on truckin'
