auto to 4spd
New User
Joined: Mar 2000
Posts: 22
Likes: 0
auto to 4spd
I swapped an auto cab onto a 3 spd chassis (both 2 wheel drive so I can't help with the 4x4 stuff) and I have at least 2 pointers. My auto cab had a neutral safety switch that I had to circumvent before I could get the truck to start (took a couple days to figure that one out). Instead of swapping the clutch pedal to the new cab, take the whole assembly from your old one. It's a large bracket that has the clutch and brake pedals attached. Much easier than putting the clutch on the auto assembly. Hope this info helps some.
Jay
Jay
Fleet Owner
Joined: Jun 1999
Posts: 24,552
Likes: 74
From: Creedmoor, North Carolina
auto to 4spd
The cab should bolt up, known issues, would be hole in the pan for shifter, and hanging the peddle assembly.
John
jowilker
66 F100s
In the still cool hours of the night, you can hear chevys rusting away.
John
jowilker
66 F100s
In the still cool hours of the night, you can hear chevys rusting away.
Thread
Thread Starter
Forum
Replies
Last Post
Bulldawg1081
1973 - 1979 F-100 & Larger F-Series Trucks
11
Apr 6, 2013 08:28 PM
Steve_Uzi
1967 - 1972 F-100 & Larger F-Series Trucks
3
Nov 2, 2000 11:25 PM
