Y pipe connector alternatives?
#17
Clifford Performance: 09-0240 Y Pipe *universal
clifford performance y-pipe. 2 1/4" inlets and outlet, im gonna get this for mine to replace the 2-in-1-out cat on my truck
clifford performance y-pipe. 2 1/4" inlets and outlet, im gonna get this for mine to replace the 2-in-1-out cat on my truck
#20
#21
design ? for mr newrider,
your flanges, found em yet, otherwise i am heading right now to see if i can back my mouth, but the question arises. hou do figure on increasing your od on the flanges. we are limited by the flange bolt centers and the swail at the end of the pipe. one more point. if you really get your back to wall i will consider cutting the flanges off my stock efi pipe for you. but you really gotta down, fair enough. later pauk md.
ps, got now facts yet but i do believe we will half to stick with factory od at the flange and increase od asap from there. whatever, old man time will tell
ps, got now facts yet but i do believe we will half to stick with factory od at the flange and increase od asap from there. whatever, old man time will tell
#22
quick update,
just got back from my local parts man. left my stock efi pipe with him. he said, i might be able to hook you up. when i left ,he was buried in the walker MASTER catalog.this man is very good at what he does,plus he TOLERATES my oddball parts requests wish you all had access him. anyway, the chances are good but i have to be patient.
later if we win one. paul md
later if we win one. paul md
#24
new ride. part # ie,nipple/flange exhaust
as short as i know how.
walker 41724 period.
my best on the net to describe.
the flange, solid,flat mild steel in other words, beefy get it done period.
the swail DOES fit a stock efi manifold at the connection period. why am i so bold. cuz i have 1 in my (0gff444nnm) hands. get it grin.
its good really good, a n answer for what you and i are doing. lets move on.
these are NOT, precision instrument figures. i did use one of my flat s steel 6 " favorite rules. as follows.
over all length 5 and 7/eights.
swail at end DOES fit a stock efi manifold because i physically matched them up.
it gets better, od at the flange jives with stock, BUT within 2 and 1/2 inches, she necks out to 2"id, i repeat, 2". and as always, it goes on and on. i stop now, BUT, hit me back in public if you wish, i AM game, and my atitude is GOOD. later, but only for NOW. g;;; bless, an happy holidays. paul md.
walker 41724 period.
my best on the net to describe.
the flange, solid,flat mild steel in other words, beefy get it done period.
the swail DOES fit a stock efi manifold at the connection period. why am i so bold. cuz i have 1 in my (0gff444nnm) hands. get it grin.
its good really good, a n answer for what you and i are doing. lets move on.
these are NOT, precision instrument figures. i did use one of my flat s steel 6 " favorite rules. as follows.
over all length 5 and 7/eights.
swail at end DOES fit a stock efi manifold because i physically matched them up.
it gets better, od at the flange jives with stock, BUT within 2 and 1/2 inches, she necks out to 2"id, i repeat, 2". and as always, it goes on and on. i stop now, BUT, hit me back in public if you wish, i AM game, and my atitude is GOOD. later, but only for NOW. g;;; bless, an happy holidays. paul md.
#25
#27
you are stone welcome,
it has been fun, its been real. and it just goes to show all of us how valuable, and hardcore this site is. listen, this is not about just me, its everybody. all the straight up folks. you know, even first channels on sites can get ugly, BUT, another chief reason i like this place is because the moderators are very forgiving, and very patient, but only to a point. they are quick to shutdown those who raise devil for whatever reason. on the FIRST channel fte. i realize there are back channels here, butt fte has them where they should be in my nobody op.for exp, i am okay with my sweetie pie reading the fte 1 channel.and it gos on. i aim to stand down on this issue for now. i gotta alot pipe to weld. take care my friend, its been a blast. and it WAS not just ME. pk md
#28
guys, paul 1 more time, then i stand down on this thread,
fellas, it goes like this, 2 major points for NOW. IST, AS SOON AS I square with my adm and fte nick and i are going to split and re register as two diff men. for the record, and to keep this part as short as possible. there is NO problem between us. it is more about this. check our join date. nick was nwhat 14 15, men i blinked my eyes and my boy grew up on me. it is proper for us to split now. he stands upon his own two feets now whether i like it or not. both of us FULLY intend to stay here , have fun, always LEARN first, i repeat, LEARN first, after that, we are always game to discuuss or knock around theory, both of us are self taught and we believe thats part of the fun. it is FUN right folks. actual factual statements that either he or i make. we do our level best to make sure that we either done it or observed it first hand first order period. this is for RESPECT for this forum period. thanks ladys and boys. #2 its xmas, we are flush ten other reasons if it fits, who cares. we worked hard to baqck our mouth. so as it wer, we do have 2 extra walker #41724 that we want to give FOC to any you boys doing the efi dual exhaust custom bend weld so on and so on no joke but we gotta keep it public. you guys will never believe this but i DO NOT have and email add at this time and frankly i am enjoying the break, fair enough. g.. bless and for the record, here in md we are getting hammered with snow, but bring it on, we love it. later paul kiernan md.
Thread
Thread Starter
Forum
Replies
Last Post
FuzzFace2
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
73
11-06-2023 05:32 PM
FuzzFace2
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
25
11-17-2020 04:31 AM
Christopher Layton
1987 - 1996 F150 & Larger F-Series Trucks
4
03-19-2016 10:43 AM
HarrisFD
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
6
02-10-2004 06:01 PM