No lights
Thread Starter
|
Elder User
Joined: Aug 2009
Posts: 946
Likes: 0
From: Clearfield County, PA
No lights
I tried to see if my newly invested highboys lights worked and only the drivers side turn signal worked. Where should i begin? Could it be a fuse that belongs to all of them? bad wires? How much of a pain will this be to fix?
Postmaster
Joined: Dec 2008
Posts: 3,940
Likes: 8
From: Southern Oregon Coast
Start with the easy stuff first then work your way back...
I'd start with the bulbs and sockets. Check for corrosion. Clean as needed... Sockets can go bad...
Then check the wiring - check for splices in the wiring as they can corrode and kill the light...
I'd start with the bulbs and sockets. Check for corrosion. Clean as needed... Sockets can go bad...
Then check the wiring - check for splices in the wiring as they can corrode and kill the light...
Elder User
Joined: Nov 2003
Posts: 522
Likes: 1
From: Harrisburg, OR
I would check and see if you got power to the lights. When I bought my tuck the headlights worked on dim but knot bright. I thought it was the dimmer switch (wrong) The elements inside the bulbs were rusted out. I got two new headlights and they work great. If I would of checked the power it would've saved me a trip to the parts house.
Thread Starter
|
Elder User
Joined: Aug 2009
Posts: 946
Likes: 0
From: Clearfield County, PA
Could possibly be. Im going to take a closer look this weekend, if not over xmas break and see if i can locate the problem.
