Nebraska's December chat and BS thread!!
FTE Legend
Joined: Jan 2009
Posts: 80,535
Likes: 97
From: Norlina NC
very.... we think we have all the leaks out of ours now... every time we thought we had the leaks outta the pipes... the nature of copper would come about and bite us in the butt...
our other problem is for some reason we're not getting normal pressure from our hot water side now... cant figure out why...
our other problem is for some reason we're not getting normal pressure from our hot water side now... cant figure out why...
FTE Legend
Joined: Jan 2009
Posts: 80,535
Likes: 97
From: Norlina NC
new now... 
dunno bout the old one... our problem was wed get one end sealed putting the new pipe in and when we went to do the other side (because of the nature of copper) the side wed just finished would undo itself...
dunno bout the old one... our problem was wed get one end sealed putting the new pipe in and when we went to do the other side (because of the nature of copper) the side wed just finished would undo itself...
Fleet Mechanic
Joined: May 2009
Posts: 1,971
Likes: 2
very.... we think we have all the leaks out of ours now... every time we thought we had the leaks outta the pipes... the nature of copper would come about and bite us in the butt...
our other problem is for some reason we're not getting normal pressure from our hot water side now... cant figure out why...
our other problem is for some reason we're not getting normal pressure from our hot water side now... cant figure out why...
That house had it happen to only one shower though, took the shower head off, let it run, cleaned the head with CLR (or is it CRL?) and problem was solved.
If that's not your issue, then i'd go to the next one, you could have accidentally caused a clog with the solder, and I say that.... because somehow I managed the same thing... (don't ask)
Everyone ready for the Game?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
FTE Legend
Joined: Jan 2009
Posts: 80,535
Likes: 97
From: Norlina NC
If your water lines have ever been completely drained, the natural deposits and what not, in the water lines can come dislodged and clog up your lines. I had that happen in one of the houses we were working on....
That house had it happen to only one shower though, took the shower head off, let it run, cleaned the head with CLR (or is it CRL?) and problem was solved.
If that's not your issue, then i'd go to the next one, you could have accidentally caused a clog with the solder, and I say that.... because somehow I managed the same thing... (don't ask)
Everyone ready for the Game?
That house had it happen to only one shower though, took the shower head off, let it run, cleaned the head with CLR (or is it CRL?) and problem was solved.
If that's not your issue, then i'd go to the next one, you could have accidentally caused a clog with the solder, and I say that.... because somehow I managed the same thing... (don't ask)
Everyone ready for the Game?
could be the last one there.... one of the times dad replaced the water heater before (on our 4th now since the house was built in 90) he installed valved on both sides of the lines.. 1 on hot one on cold... so when we "found" the tank leaking both lines were turned off... so the lines inside the house were never drained... but i wouldnt put it past something getting "dislodged" either...
weird thing is downstairs has full pressure... its upstairs that doesnt...
Posting Guru
Joined: Nov 2008
Posts: 2,391
Likes: 0
From: Mesa, Arizona
Afternoon everyone!!! I have returned, only to disappear again to start the next 2 portrait models that need to be done by Feb.!!! I love my truck!!! Nothing can stop it!!
the only other thing that Joe has broken on it is the lower, black, plastic valance that just has a crack in it from hitting 5 ft. drifts!!! not too concerned about that since you cant really see it!!lol
the only other thing that Joe has broken on it is the lower, black, plastic valance that just has a crack in it from hitting 5 ft. drifts!!! not too concerned about that since you cant really see it!!lol
Thread Starter
|
Super Moderator
Joined: Dec 2005
Posts: 208,495
Likes: 410
From: Omaha/Elkhorn, NE
Hey girl, about time you showed your face in here! Hey, you guys going to be home tonight? I need to schedule with Joe about getting that remote starter in the Expedition.