Tuner/Programmer
Cargo Master
Joined: Feb 2008
Posts: 3,409
Likes: 1
From: back in SE Iowa
its impossible to make one because these are a mechanical engine and not an electronically controlled engine.now if you have an e40d transmission you can put a programmer on the tranny to change shift patterns and such.
Thread Starter
|
Senior User
Joined: Oct 2009
Posts: 195
Likes: 0
From: Driftwood Pa & Duncan OK
well thats handy to know, haven't really done much with this truck and was curious off hand, I knew it was IDI but assumed it was electronically controlled, oops! :P thanks for that rupe! 
Cargo Master
Joined: Feb 2008
Posts: 3,409
Likes: 1
From: back in SE Iowa
hey no problem.you can however do some other things to put more power out.like set up a ram air system if you have a turbo i would straight pipe it.if not go to a 3" exhaust.there is an endless amount of things you can do really.
Thread Starter
|
Senior User
Joined: Oct 2009
Posts: 195
Likes: 0
From: Driftwood Pa & Duncan OK
yep, already started modding it as a matter of fact, muffler bit the dust just two days ago, pretty funny if ya think about, when I get back to work I'm planning on putting on ATS' turbo system among other things, thanks again for the help mate
Thread
Thread Starter
Forum
Replies
Last Post
