'05 EB SCT X3 issues
Thread Starter
|
New User
Joined: Jul 2009
Posts: 5
Likes: 0
'05 EB SCT X3 issues
After emailing an SCT representative for over 2-weeks without resolve, I thought I would come here and ask you guys.
I have an older non-enhanced SCT X3 with pre programmed tunes (SCT now considers this a part number 3015, which is the SF3.) It has been updated with the latest firmware and TuneRev. When I upload a tune, the check engine light is on and the message center reads:
CHECK ELECTNC
THROTTLE CNTRL
I don't even have to start the engine, the message center displays the info from the moment the key is in the "ON" position. When I check for codes, it shows "P060<". Clearing the code does not help. When I went back to stock, error message goes away and no codes.
Anyone else have this issue?
I have an older non-enhanced SCT X3 with pre programmed tunes (SCT now considers this a part number 3015, which is the SF3.) It has been updated with the latest firmware and TuneRev. When I upload a tune, the check engine light is on and the message center reads:
CHECK ELECTNC
THROTTLE CNTRL
I don't even have to start the engine, the message center displays the info from the moment the key is in the "ON" position. When I check for codes, it shows "P060<". Clearing the code does not help. When I went back to stock, error message goes away and no codes.
Anyone else have this issue?
Thread
Thread Starter
Forum
Replies
Last Post
Lilpooh
6.0L Power Stroke Diesel
13
Feb 18, 2013 08:48 PM
