When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
im in the process of installing my silver remote start/keyless system on my 92 Bronco eddie. I have run into a problem. On the ford silver "B" harness (car start harness) there is no output for the starter.
What I need to know is what wire from the unit runs to the Red/Lt blue wire in the ign harness that controls the starter
Any ford dealership guys out there that could get the install diagrams? I found some links for 02 and newer installs....