Slammin' a 66'
Thread Starter
|
New User
Joined: Mar 2009
Posts: 13
Likes: 0
Slammin' a 66'
Has anyone put one of those after market Mustang II kits in there slick? I've seen tons of companies with the kits to do ifs on the old 54-56 models but what about our trucks? Has anyone done this? Most guys I talk to are using the dropped I-Beams but I want low.. I mean really low.
Hotshot
Joined: Jan 2007
Posts: 11,564
Likes: 4
From: Tucson
Hi Matt, Look here first! ICMenu
MII aka Pinto front suspension is not strong enough for the weight of a slick.
the dakota crossmember steve offers is SWEET! My friend Dave has one in his truck and it sits real low! + droped spindles and cut coils(or i guess you could bag it) will get you down there.
MII aka Pinto front suspension is not strong enough for the weight of a slick.
the dakota crossmember steve offers is SWEET! My friend Dave has one in his truck and it sits real low! + droped spindles and cut coils(or i guess you could bag it) will get you down there.
Senior User
Joined: Dec 2008
Posts: 485
Likes: 0
From: Fowlerville, Michigan
Fatman Fabrications has complete bolt-in IFS front ends for the '60's pickups available with springs, coilovers and bags.
Check 'em out... Fatman Fabrications
Check 'em out... Fatman Fabrications
