OBD1 may be fried
Thread Starter
|
New User
Joined: Oct 2009
Posts: 16
Likes: 0
OBD1 may be fried
Can any one tell me what to look for? My motor home is on a Ford chassis. I have been trying to find out what could be wrong. I have replaced the Distributer, distributer cap, rotor button, starter, plugs, plug wires, module, ignition switch, and the coil. It still will not start. It doesn't get fire, or fuel.
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Hey Tony! 
Give the site a chance to answer your question. The tech forums are the ones to use and posting in the Large Truck forum was a good place to go. A little more info would also help, like engine size and year. Don't be afraid to jump into the tech forums and use them to help you out. The one for your engine might be the ticket.
Give the site a chance to answer your question. The tech forums are the ones to use and posting in the Large Truck forum was a good place to go. A little more info would also help, like engine size and year. Don't be afraid to jump into the tech forums and use them to help you out. The one for your engine might be the ticket.
Good! Posting it as you did in the 460 forum should get you some help.
Thread
Thread Starter
Forum
Replies
Last Post
earnhardtracer38
General NON-Automotive Conversation
13
Nov 6, 2009 05:16 PM
