msd distributor wiring

Reply Subscribe

Thread Tools

Search this Thread

Oct 14, 2009 | 07:03 PM

9d4

Thread Starter

Senior User

Joined: Dec 2003

Posts: 222

Likes: 0

From: Washington State

msd distributor wiring

I am putting a msd pro billet dist and the 6 box. (74 ford 390) Everything is pretty much straight forward EXCEPT, someone ran the dist without the magnetic pick up. I am putting a new plug on it and using the pickup. Problem is on the distributor the 2 wires coming off it are black and orange...And black and violet does anyone know witch plugs into the green, and witch one plugs into the violet of the box?? I didn't see anything on the msd site, it just shows the magnetic pick up plugged in and shows the green and the violet wire, but says nothing of the colors of the 2 wires on the distributor

thanx in advance

Oct 15, 2009 | 12:24 AM

Franklin2

Moderator

Joined: Jan 2001

Posts: 56,997

Likes: 2,743

From: Virginia

What dist are you using? The MSD unit or the Ford unit? The distributor will run the engine without the magnetic pickup inside it?

Oct 16, 2009 | 10:09 PM