Didn't come up with anything using search, hopefully someone can decode this. VIN F36SREC5128, WB 133, Col 80, Type F360, Body CB4, Trans K, Axle B4. What model would the front axle and transfer case be? Thx.

 

F36= F-350 4x4
S= 400
R= San Jose assembly plant
EC5128= built Jan '79

WB133= 8' box
Col80= color, don't show a listing for 80
Type F360= 8500lb GVW
Body CB4= Ranger XLT with bench seat, cloth and vinyl, Blue interior, styleside pickup
Trans K= C6`
Axle B4= Dana 60 limited slip, 4.10, 5300lb

Front axle should be a D60 but could have been swapped out over it's life. T-case is either a 203 or a 205.

 

Thx, the truck is 2 tone blue and supposed to be original. It's a friends truck and I've only seen it a couple of times. Will doublecheck the paint code.

 

Color codes are always singular. If it has two, it's two toned in some form.

8: Medium Blue Metallic
O: Silver Metallic

The O is a letter "O" not a zero.

------

F360 is actually rated at 8550 GVWR, to keep the 1-ton in the heavy duty truck category.

 

Not to hijack the thread, but if F26 were in place of the F36, would that make it an f-250?