sold
Thread Starter
|
Logistics Pro
Joined: Jul 2004
Posts: 4,363
Likes: 76
From: Utah
sold
Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Item Condition: International
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck
New User
Joined: Aug 2003
Posts: 2
Likes: 0
From: Las Vegas
Mornin' Mr Madsen, I have an F4 Dually and I'm looking for an Express Bed w/fenders. What is the dimension from the back of cab to axle centerline? I've discovered that not all express beds have the same wheel location. Your fenders are fairly rusted thru at the back. Is the bed in the same condition? It looks pretty good.
I would like to have the long F3 running boards, Express Bed, F1 Fenders (they're fatter for my dually). My rear gears are too low and I was told that the F3 Axle would work or that the gears are interchangable with the F4. My truck can be seen at FTE 1952 Ford F3 4x2 - 52XXL
I would like to have the long F3 running boards, Express Bed, F1 Fenders (they're fatter for my dually). My rear gears are too low and I was told that the F3 Axle would work or that the gears are interchangable with the F4. My truck can be seen at FTE 1952 Ford F3 4x2 - 52XXL
Thread Starter
|
Logistics Pro
Joined: Jul 2004
Posts: 4,363
Likes: 76
From: Utah
Mornin' Mr Madsen, I have an F4 Dually and I'm looking for an Express Bed w/fenders. What is the dimension from the back of cab to axle centerline? I've discovered that not all express beds have the same wheel location. Your fenders are fairly rusted thru at the back. Is the bed in the same condition? It looks pretty good.
I would like to have the long F3 running boards, Express Bed, F1 Fenders (they're fatter for my dually). My rear gears are too low and I was told that the F3 Axle would work or that the gears are interchangable with the F4. My truck can be seen at FTE 1952 Ford F3 4x2 - 52XXL
I would like to have the long F3 running boards, Express Bed, F1 Fenders (they're fatter for my dually). My rear gears are too low and I was told that the F3 Axle would work or that the gears are interchangable with the F4. My truck can be seen at FTE 1952 Ford F3 4x2 - 52XXL
I sent you an email but not sure you recieved it? please give me a call at 801-694-8826
express bed length from back of cab to centerline looks to be right around 48-49"
not sure an f-2 f-3 axle will get you any better gearing?? as I think they are 4.86 but have not verified them. I think waht you want is a dana 60 from a later ford truck 3/4 ton?
New User
Joined: Feb 2010
Posts: 1
Likes: 0
51 f5 fenders
Hi I am looking for a set of front fenders for my 51 f 5 I know all the fenders from f2 thru f8 fit those trucks and i believe the 52 fenders too. Do you have any of those or know where I could look for some? thanks for your time
Trending Topics
Thread Starter
|
Logistics Pro
Joined: Jul 2004
Posts: 4,363
Likes: 76
From: Utah
thanks
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Post Fiend
Joined: May 2008
Posts: 7,641
Likes: 21
From: Poway, Ca.
I need a 51/52 Factory "Rolled and Channeled" back bumper! Like the one in the pic!
Got one by any chance?
Also, I need a pair of F1 running boards but only about 18-24 inches forward of the rear fender (so a pair that the fronts are bad will do). Do you have a set of F1 running boards in decent shape and how much do you want for them?
Got one by any chance?
Also, I need a pair of F1 running boards but only about 18-24 inches forward of the rear fender (so a pair that the fronts are bad will do). Do you have a set of F1 running boards in decent shape and how much do you want for them?
New User
Joined: Mar 2010
Posts: 3
Likes: 0
I need the front fenders and a grill panel for an F1...I like the 51-52 style, and all I have are the inner fenders, so 48-50 parts are fine too. email me at 4t64rd@gmail.com, price and Greyhound shipping to Clearwater, FL
Need PARTS!!!
Thread Starter
|
Logistics Pro
Joined: Jul 2004
Posts: 4,363
Likes: 76
From: Utah
I don't have a rear bumper, at least not an original one.
the tailgate in picture above is not in good shape, however I just earlier this week put a different tailgate up on EBay thats in better shape, I for some reason haven't been getting notifications on posts here. ?
thanks
the tailgate in picture above is not in good shape, however I just earlier this week put a different tailgate up on EBay thats in better shape, I for some reason haven't been getting notifications on posts here. ?
thanks
