A stupid question ?
Thread Starter
|
Freshman User
Joined: Apr 2007
Posts: 36
Likes: 0
A stupid question ?
I know it may sound stupid but were the h***. is the Hazard/Warning Flasher located?
Some people say that it is on the back of the fuse box but the only one i seen on or near the fuse panel is the turn signal flasher. I have no Hazard lights. and i am trying to fix this issue.
Some people say that it is on the back of the fuse box but the only one i seen on or near the fuse panel is the turn signal flasher. I have no Hazard lights. and i am trying to fix this issue.
Lead Driver
Joined: Dec 2002
Posts: 5,491
Likes: 16
From: Kuna ID
There are two flashers on the fuse box. The one on the front is for the turn signals, the one for the hazards is on the back of the fuse box (between fuse box and firewall). It can be difficult to see or remove. There are only 3 bolts(I think) holding the fuse box to the firewall. You can pop it off real quick if you need to. As was mentioned a PO could have removed it. If the turn signal flasher dies, some people will just swap in the other flasher and never replace the bad one.
Thread Starter
|
Freshman User
Joined: Apr 2007
Posts: 36
Likes: 0
yeah, today on my lunch break i unscrewed the fuse panel from the firewall and i did not see any flasher. But after a closer inspection i did see a similair plug as to the flasher. So i plugged in a new HD flasher and Low-and-be-hold they work. first time in years i have working hazard lights. Thank you guys for the help.
