Need powertrain measurment
Thread Starter
|
Hotshot
Joined: Oct 2003
Posts: 17,799
Likes: 103
From: Ashland City, TN
Need powertrain measurment
I think my yoke is to far out of my T-Case
Could somebody with a slip yoke style T-Case get a measurement for me of how far out their Yoke is?
I have a single piece drive shaft.
I could unbolt it and slide it forward, and check, but I don't want to dork with it if nothing is wrong.
Measure from the T-case forward, or the yoke forward, not the yoke seal.
If you can take a picture of the measurement if you can.
Could somebody with a slip yoke style T-Case get a measurement for me of how far out their Yoke is?
I have a single piece drive shaft.
I could unbolt it and slide it forward, and check, but I don't want to dork with it if nothing is wrong.
Measure from the T-case forward, or the yoke forward, not the yoke seal.
If you can take a picture of the measurement if you can.
