Part Numbers..
Thread Starter
|
Senior User
Joined: Jan 2009
Posts: 458
Likes: 0
Part Numbers..
ok soo just bought the wicked wheel and now i think you guys have convinced me to pull the turbo off to install it now my next question is. whats the part number for the O-Ring kit i would need?? and the other questions is whats the part number for the Up-Pipe Donut gaskets?? i would love to get belllowed but just dont have the cash right now. so i need the best donut gasket out there on the market that will create a nice seal and the part number for that...thanks alot
Because racetruck
Joined: Apr 2007
Posts: 2,786
Likes: 104
From: Monterey Bay, CA
The only thing on the market that will create a nice seal on the up-pipes is the bellowed set up. Your better off doing nothing and saving your money for the bellowed. There have been others who have just replaced the donuts and had them leak a few months later.
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
O-rings are here http://dieselorings.com/index.php?pa...&cat=9&group=6
Felpro 8194 are the small block donuts that are slightly larger than stock and can be used as replacements for the stock donuts.
Felpro 8194 are the small block donuts that are slightly larger than stock and can be used as replacements for the stock donuts.
Postmaster
Joined: Jul 2004
Posts: 3,156
Likes: 0
From: Yuba City, CA.
I agree with Peter. You don't want to go that far and have the y pipe break on you, which there's a 50-50 chance of that happening, then having to buy that also. Save up some money, and do it all while your there.
