Quick ?
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
It's that 5x7 odd size. They aren't components though, it's going to be a full range co-axial type. I think you can fit the 5 1/4" components in the stock hole without modification, but the 6 1/2" or 6 3/4" components systems will take a little trimming.
FTE Leadership Emeritus
Joined: Aug 2006
Posts: 47,280
Likes: 172
From: DELAWARE, The First State
Where are you ordering from?
Crutchfield shows 5x7 for front and back. You probable should stay with the same size all away around and modify the mounting space to accomodate the size you get.
Crutchfield shows 5x7 for front and back. You probable should stay with the same size all away around and modify the mounting space to accomodate the size you get.
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
The bigger the woofer in the speaker, the clearer the low freqs will be (more or less). Myself, I would put 6.5" components in the front and spend a couple hundred dollars on them. Then the 5x7 mid grade speakers for the rear. The idea being you want the front stage to be very clear and concise, the rear channels are mostly filler so you can spend a little less on them.
