8 Inch Lift
Thread Starter
|
New User
Joined: Aug 2009
Posts: 7
Likes: 0
8 Inch Lift
Hello everyone. I am going to be putting an 8 inch lift on my 2001 F250 super duty. If anyone has put one on before, any suggestions or tips? Also, how much longer will the drive shafts need to be?
Thanks for your help everyone!
Thanks for your help everyone!
Senior User
Joined: Aug 2009
Posts: 107
Likes: 0
What kind?? Doesn't need to be any longer just need a spacer above carrier bearing on crew cabs like mine to keep driveline correct and if you don't it will shake taking off. I can't help with all these technical questions but do know lifts.
Senior User
Joined: Aug 2009
Posts: 107
Likes: 0
You should clear fine until you turn. Probly gonna have to trim the valence on front and maybe loosen inner fender on back and reconnect it out of the way. Thats what i did on mine but it's got 10" and forty's. Shouldn't see much rubbing on the springs if any since the tires will be spaced out away from truck. any ? let me know can send pic of my front bumper later
Posting Guru
Joined: Jan 2007
Posts: 2,174
Likes: 1
From: Millersburg, OR
Contact Clay with Riffraff Diesel, he is a sponsor here. He should be able to help you out. www.riffraffdiesel.com
go with an Ikon 8", don't need to worry about the driveline... just need some carrier bearing adjustment...
go with an Ikon 8", don't need to worry about the driveline... just need some carrier bearing adjustment...
Thread
Thread Starter
Forum
Replies
Last Post
