When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sanderson fit,finish and quality is very nice..another option may be to check around for headers that will work with the 351w into a fox-body (conversion/swap) and look at those choices..check my gallery. I think you will find your choices limited to the block-hugger variety. Also,as a side note, look at the 'stage eight' header-to-head fastner's;they will prevent the header-bolts from backing outand burning thru gaskets.My friends have also had good luck with the 'copper'gaskets with all kinds of different headers. Good Luck!
Hi Julie, yes I did. I went with a Toyota PS swap, build my own bracket, but there are
kits out there that have one. Also went with a Jeep steering column and they fit great.
The Sandersons hug the engine and I have plenty of clearance for the Toy PS box.