hey guys, i need either the part number for the tab that goes on the back of the driver door lock cylinder with the plastic piece the lock rod clips into, or a driver side door lock cylinder.
i looked on ebay and amazon, buy they only sell lock sets, and i have no need for two locks and an ignition key as my truck only has one door key.
truck is a 04 F350 with 06 F250 doors on it.

 

Go to your local parts store and look in their parts help area. They should carry the plastic clips.

https://www.dormanproducts.com/p-949...origin=keyword

 

not that one, the one that goes on the back of the lock cylinder that the rod goes into. looks sorta like a white plastic horseshoe over a metal plate with a bending tab on each side to hold the rod in place

you can see it on the end of the bottom cylinder.

 

The they are not held on with a screw, you will probably have to buy the locks and maybe re-key them or carry two keys or visit the local pick n pull junkyard.

 

that is what i was afraid of.

this one actually has a "jesus christ clip" holding it on. that was why i figured it may be a separate part.