Need measurement please
Thread Starter
|
Posting Guru
Joined: Jun 2009
Posts: 1,443
Likes: 1
From: Bastrop, Texas (Austin,TX
Need measurement please
I hoping someone can help me with some measurements. I'm looking at making an offroad buggy using the front half of a 93+ ranger extended cab,but I don't own one yet. I'm looking for two measurements please.
1) from the front spindle/center of wheel straight back to the very back of the cab
2) from the front spindle/center of wheel straight back to beginning of firewall
I'm basically looking for the wheel base of a ranger if you cut the truck off behind the cab. I'm thinking of putting the body on top of a V10 fullsize chassis I have and then fabbing-up a cage for the rear. Thanks!!
1) from the front spindle/center of wheel straight back to the very back of the cab
2) from the front spindle/center of wheel straight back to beginning of firewall
I'm basically looking for the wheel base of a ranger if you cut the truck off behind the cab. I'm thinking of putting the body on top of a V10 fullsize chassis I have and then fabbing-up a cage for the rear. Thanks!!
