purchasing rims need help
Elder User
Joined: Jan 2009
Posts: 741
Likes: 8
From: Western N.C.
I went out and measured again.
The center bore of my wheels is 4.25, but the flange itself is 3" dead even.
My mistake...I'd still err on the side of caution and look for a center bore of at least 3.5, depending on what type of center caps are used.
At least by looking at 4.25 bores I would be assured that everything would clear.
Sorry for causing the confusion.
The center bore of my wheels is 4.25, but the flange itself is 3" dead even.
My mistake...I'd still err on the side of caution and look for a center bore of at least 3.5, depending on what type of center caps are used.
At least by looking at 4.25 bores I would be assured that everything would clear.
Sorry for causing the confusion.
Thread
Thread Starter
Forum
Replies
Last Post
dave47111
1987 - 1996 F150 & Larger F-Series Trucks
15
Jan 27, 2011 10:19 AM
whatsamiam
1987 - 1996 F150 & Larger F-Series Trucks
16
Jul 15, 2002 02:04 PM
