Starting Issues
Thread Starter
|
Senior User
Joined: Feb 2009
Posts: 134
Likes: 0
Starting Issues
I had my intake manifold off to look at my lifters (long story) and I put everything back together and started it and realized that the rear cork part of the gasket got out of place when I put the intake back on, So I took everything apart again, fixed it, and put it back together.
When I tried starting it, the starter would crank but no fire. Not even one cylinder is firing.
I know it is electrical because it is getting fuel and not the spark plugs because I checked them 4 times.
Any ideas? Input would be much appreciated.
When I tried starting it, the starter would crank but no fire. Not even one cylinder is firing.
I know it is electrical because it is getting fuel and not the spark plugs because I checked them 4 times.
Any ideas? Input would be much appreciated.
