Pressure washer help
Thread Starter
|
Elder User
Joined: Jun 2008
Posts: 694
Likes: 8
From: Vashon, WA
Pressure washer help
I've got a 4hp Honda GC pressure washer. Yesterday it was getting worse and worse all day and now it barley has any pressure at all. When I first pull the trigger it gets full pressure for a split second then drops off to almost none.
I have a feeling somethings is stuck or clogged but not sure where to start looking or what to take apart. Any ideas?
I have a feeling somethings is stuck or clogged but not sure where to start looking or what to take apart. Any ideas?
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
Make sure you've got oil in the pressure pump. Then remove the tip and run some water through it and into a filter or bucket so you can check for debris. Also check the back side of the tip. If you see little plastic or rubber pieces come out of the hose, you'll need to rebuild the pump.
Thread
Thread Starter
Forum
Replies
Last Post
tseekins
General NON-Automotive Conversation
3
Jun 28, 2010 08:56 PM
