Replacement Wastegate
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 324
Likes: 0
Replacement Wastegate
I broke the acuator rod on my stock wastegate & need a replacement waste gate.
The only two I have found so far are theTurbo Master from Diesel site & the Banks big head, any ideas as to which one would be better? and will either fit an ATS housing
Thanks
Rich
The only two I have found so far are theTurbo Master from Diesel site & the Banks big head, any ideas as to which one would be better? and will either fit an ATS housing
Thanks
Rich
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 25
From: Damon (South East Texas)
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 25
From: Damon (South East Texas)
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 25
From: Damon (South East Texas)
I like it much better over the stock WG actuator. The one that Ron sells has an advantage over the stock one when the red line is till connected (more spring tension). I think the TM holds more boost up until "blow off" than the stock or the aftermarket one. Right now I have my TM tightened all the way with my 38r. I don't over boost with the lower drive pressure it has. I may have to tweak it after I install my injectors next month.
