Backfireing 360FE

Reply Subscribe

Thread Tools

Search this Thread

May 21, 2009 | 07:10 PM

spfd14_26

Thread Starter

New User

Joined: May 2009

Posts: 3

Likes: 0

Backfireing 360FE

I have a 1975 Ford F-250 Highboy with 360FE motor with the 435 4-speed, i have a backfire whenever i rev the engine above 3,000 rpm. the motor has some modifications, Headers, Holley dual pumper 750, points distributor, its been bored out, and the heads were redone. i think it has a cam, i dont know, i wasnt the one who rebuilt it or did all the work to the motor. i checked the timeing, tweaked the carb, and still backfireing. let me know what ya'll think, any feedback would be appreciated. Thank You. -Brian.-

May 21, 2009 | 10:53 PM

Bullitt390

Certified Thread Hijacker

Joined: Aug 2001

Posts: 14,441

Likes: 60

Vacuum advance distributor? Where is the vacuum line hooked up?

What is your timing set at?

Josh

May 21, 2009 | 11:05 PM

fmc400

MSEE

Joined: Apr 2004

Posts: 10,386

Likes: 35

From: Austin, TX

Put some white paint on the timing mark on the balancer, and watch the timing mark with a timing light while the motor idles. There might be slop in the timing chain.