Engine swap
Thread Starter
|
New User
Joined: May 2009
Posts: 1
Likes: 0
Engine swap
Hey guys i'm knew to the forum, but I have had a ford in my driveway since I was a kid. Here's a question I have, I just bought a 1986 f150 with the efi 302 engine. I'd rather have a carburated version of the 302 in this truck. I want to change the engine but I do not want to hack up the wiring to chage to a carb engine. What are my cheapest options. How have any of you done this swap. Any help would be great.
Thanks,
OFK
Thanks,
OFK
Senior User
Joined: Mar 2006
Posts: 212
Likes: 0
From: Morganton, NC
Go to autozone and get a ignition module for a 85 Mustang with a automatic as well as the distributor and coil.
Find a duraspark II wiring diagram online, and wire it up.
You will also need a new fuel pump as well as a throttle cable.
If I were you, I would leave the EFI alone. EFI driveability is 1000X better than a carb.
Find a duraspark II wiring diagram online, and wire it up.
You will also need a new fuel pump as well as a throttle cable.
If I were you, I would leave the EFI alone. EFI driveability is 1000X better than a carb.
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
Most engines are. My 300 is the exception, but only because you can't build it as cheaply as a carb'd one. Still, I have 20 more horse than a basic carb'd 300 and never have to worry about the timing or anything. So.. EFI rocks.
Elder User
Joined: Jan 2009
Posts: 712
Likes: 0
From: Blue Eye, mo. hwy 86 & JJ
Trending Topics
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
here's bill's 300-6 lol
YouTube - 1000 hp power ford 6 turbo
YouTube - 1000 hp power ford 6 turbo
Edit: Hey hitman, you have any more pictures of your '85? I want to see it with the wide rims. What kind of condition is the truck in? You should sell it to me. =D
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Senior User
Joined: Jan 2005
Posts: 141
Likes: 1
A turbo puts a huge restriction in the exhaust path, which is why turbocharged engines do not need to take backpressure into consideration when building an exhaust. It creates its own. Plus, with all the gasses being compressed at this restriction, it creates alot of pressure, which creates heat. Lots of it.
I've had my eclipse turbo and manifold glow on a number of occasions, it just comes with the territory of making alot of power. Doesn't really have any effect on whether or not it's good for a DD. Just have to make sure temps stay low enough that you don't start melting things. I've vented my hood to help alleviate all the excess heat created by the turbo. Helps when you want to open the hood to look at something and not bake.
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
A turbo puts a huge restriction in the exhaust path, which is why turbocharged engines do not need to take backpressure into consideration when building an exhaust. It creates its own. Plus, with all the gasses being compressed at this restriction, it creates alot of pressure, which creates heat. Lots of it.
I've had my eclipse turbo and manifold glow on a number of occasions, it just comes with the territory of making alot of power. Doesn't really have any effect on whether or not it's good for a DD. Just have to make sure temps stay low enough that you don't start melting things. I've vented my hood to help alleviate all the excess heat created by the turbo. Helps when you want to open the hood to look at something and not bake.
I've had my eclipse turbo and manifold glow on a number of occasions, it just comes with the territory of making alot of power. Doesn't really have any effect on whether or not it's good for a DD. Just have to make sure temps stay low enough that you don't start melting things. I've vented my hood to help alleviate all the excess heat created by the turbo. Helps when you want to open the hood to look at something and not bake.
