Still no lights
Thread Starter
|
Junior User
Joined: Feb 2009
Posts: 53
Likes: 0
Still no lights
i still can't get my low beams and my dashlights back on.. i have my high beams and parking lights. found my dimmer switch broken. replaced that and still don't have low beams. i have a new headlight switch in as well.. anyone got any ideas.
Thanks
Thanks
Fleet Mechanic
Joined: Mar 2004
Posts: 1,398
Likes: 17
From: Hesperia, CA
The problem with no dash lights and no low beams have got to be two separate problems. Since you have high beams then the voltage is getting to the dimmer switch. You need to go to the dimmer switch and see if there is voltage on the switch terminal in the low beam position. If you do then you have a wiring problem. If not then the new switch is bad, but I suspect a wiring problem since you had the problem before you changed the switch.
Double-check the terminals on the wires to the low beams where they connect to the dimmer switch. Look for corrosion and/or broken wires. I have seen wires broken inside of the sheathing right at the terminal connectors.
Double-check the terminals on the wires to the low beams where they connect to the dimmer switch. Look for corrosion and/or broken wires. I have seen wires broken inside of the sheathing right at the terminal connectors.
