axle assembly question
Thread Starter
|
Junior User
Joined: Feb 2009
Posts: 57
Likes: 0
axle assembly question
on the back of the wheel hub there is a outer bearing and inner or spindle can you replace the spindle and does it come out easy along with go in ford doesnt sell it by there self at least thats what the dealer said
Senior User
Joined: Apr 2009
Posts: 118
Likes: 0
If you are talking about the one that the outer axle shaft rides on in the front axle, you can get it at Napa.
You can get it out with a punch and hammer from the back side.
Part# PGB PB2110 and they are $5.49/ea.
They also stock the axle tube dust seal for much cheaper than a ford part.
NAPA 21918 and they are $8.12/ea.
You can get it out with a punch and hammer from the back side.
Part# PGB PB2110 and they are $5.49/ea.
They also stock the axle tube dust seal for much cheaper than a ford part.
NAPA 21918 and they are $8.12/ea.
FTE Leadership Emeritus
Joined: Jul 2002
Posts: 42,561
Likes: 423
From: Long Island USA
National or Federal Mogul B-2110.
You can actually get them from Ford, but I think you need to ask for one for a mid-90's.
But why bother? Go to Napa or your other local store and ask for a B-2110
You can actually get them from Ford, but I think you need to ask for one for a mid-90's.
But why bother? Go to Napa or your other local store and ask for a B-2110
Thread
Thread Starter
Forum
Replies
Last Post
