390 build help?
Cargo Master
Joined: Aug 2000
Posts: 2,931
Likes: 12
From: SW Michigan
390 build
D-Shake, sounds like you're on the right track. No, the 428CJ cam is not too big. Before it was used in the 428CJ, it, or something awefully close, was the 390GT cam. But you don't have to limit yourself to 40 yr old cam technology. Newer grinds are available that have similar duration but steeper ramps- gives a better idle- and more lift- breathes better. You might contact Dr Rabotnick at survival motorsports. He specializes in the FE series engines and has several nice grinds. DinosaurFan
Welcome to FTE !
Welcome to FTE !
