J Hook / Tie Downs
There's a place here in town you need to know about - you will love, and will be harder to get you out of than the kids at "Toys-R-Us."
It's called:
Marshals Industrial Hardware
8423 Production Ave.
San Diego, Ca. 92121
(858) 271-5555
They will have your hooks and anything else you will ever need hardware wise!
I-805 North exit on Miramar Rd. Head east (toward I-15) on Miramar Rd. Production is about 3/4 mile from the freeway (805).
Turn left on "Production" and you will see a red sign on the right hand side just as you cross the railroad tracks!
Have fun!
PS. They sell drip pans too if you need any more under that truck!!!!!
Just a thought about those hooks. On my 55, the PO had mounted some in just about the same place yours were. And he must have been haulin' some STUFF because the hooks had pulled enough to distort the bed a little.
I wanted hooks too, but not the distortion, so I cut a piece of 5/4 Honduran Mahogany to fit under the bed angle/roll, then with a little countersinking on the backside of the mahogany, bolted the hooks to the wood. Then used a couple carraige bolts to hold it up under the bed edge. Worked good and no distortion. It also will save the paint on the bed role because the hooks won't be tucked under so much and chaffe that edge.
Just a thought!



