When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i have 92 ford e-150 is there any web sites that have the right exact body panels for my vehicle any help
i don;t know how much the ford vans body style changed
I think they are a year or two behind the trucks in changing, the fenders and grille on yours probably looks like the 87-91 F150. I don't think the fenders will fit, but the grilles and headlights should be the same. If your looking for sheet metal, check with your local body shops, they might charge you a bit more, but shipping sheet metal is difficult. UPS and Fedex are hard on them if the parts aren't too big to ship with them. A lot of body parts end up on less than freight trucks which carry heavier/larger items and still can get banged around. Body shops will have a good idea who can ship to your area without much damage.
i have 92 ford e-150 is there any web sites that have the right exact body panels for my vehicle any help
i don't know how much the ford vans body style changed
Econoline body changes:
1961/67 // 1968/74 / 1975/91 / 1992 thru today.
Not one piece of Econoline sheetmetal is the same before 1992.
1992 was the first year the Econoline received an all new body since 1975.
Since Ford sold all the sheet metal by piece by piece, you can prolly buy new sheetmetal from Ford.
Which parts do you need? I can look 'em up, see if they are still available, list the MSRP and FTE member discount prices.
If the parts are obsolete, I'll list the dealers and obsolete parts vendors who have them.
i know i can get right rocker panel upper rear wheel arch Rh side
because there are some rust spots and some holes near the rear lower wheel arch
i need the panel for the left side that is above the rocker panel
but i don't know what that panel is called
the 75-91 models vans do they use the same body panels
If Ford won't sell you a panel, and the catalogs don't list them, I guess your options are to have a sheet metal wizard make one up for you, or cut one off a wrecked van.
i know i can get right rocker panel upper rear wheel arch Rh side
because there are some rust spots and some holes near the rear lower wheel arch
i need the panel for the left side that is above the rocker panel
but i don't know what that panel is called
the 75-91 models vans do they use the same body panels
MSRP: $ // FTEpartsguy.com price: $
------------------------------------------------
Fits: 1992/2009 E150/350 except 1996/2009 E Super Duty.
--------------------------------------------------------- I cannot price anything else at this time, the Ford parts locator just went down for...who knows why.
I'll be back to price out the rest later this morning when the system wakes up.