acrylic enamel question
Thread Starter
|
Freshman User
Joined: Dec 2008
Posts: 28
Likes: 0
acrylic enamel question
i'm painting my 76' and i had to stop painting last night about half way done. i didn't have enough light to see what i was doing. can i resume painting this morning where i left off, perhaps by wiping the truck down with laquer thinner or paint thinner or do i need to (ugh) wet sand the truck again for proper adhesion? or maybe just go for it? this isn't a show quality job by any means.
i'm using centari acrylic enamel with hardener.
thanks for the help!
i'm using centari acrylic enamel with hardener.
thanks for the help!
Thread Starter
|
Freshman User
Joined: Dec 2008
Posts: 28
Likes: 0
nobody home i guess? maybe you're all out painting.
i am wet sanding it again with 800 (super fun!) but only the parts which were unfinished.
if i have enough paint left i may sand and go over the finished parts again, but probably not.
i am wet sanding it again with 800 (super fun!) but only the parts which were unfinished.
if i have enough paint left i may sand and go over the finished parts again, but probably not.
