Rust replacment panels
Thread Starter
|
Laughing Gas
Joined: Jul 1999
Posts: 1,048
Likes: 22
From: Lacey, WA
Rust replacment panels
OK folks
I have located every supplier of rust repair panels on the net that I can. I am ready to order floor pans for my 70 F250. I have read that the JC Whitney panels are imports and can/will rust in 2 years. UNACCEPTABLE!
OK guy's who should I order from to get some lasting panels? I am currently looking to order from "Murphy's" $39.00 each side. Anyone do business with them?
HELP!!
Lee
I have located every supplier of rust repair panels on the net that I can. I am ready to order floor pans for my 70 F250. I have read that the JC Whitney panels are imports and can/will rust in 2 years. UNACCEPTABLE!
OK guy's who should I order from to get some lasting panels? I am currently looking to order from "Murphy's" $39.00 each side. Anyone do business with them?
HELP!!
Lee
New User
Joined: Jan 2001
Posts: 22
Likes: 0
Rust replacment panels
Lee,
Haven't really seen anything I would consider acceptable.
I fabricated some a couple of years ago. It's not as tough as one might think. If you want factory, try a salvage yard. I am local to a yard (in Ga.) that is loaded with ford pick ups.
(it's a goldmine!
)
A quick spark of the ole torches and walla!!!
Factory floors!!!
Best of luck,
Casey
Haven't really seen anything I would consider acceptable.
I fabricated some a couple of years ago. It's not as tough as one might think. If you want factory, try a salvage yard. I am local to a yard (in Ga.) that is loaded with ford pick ups.
(it's a goldmine!
)A quick spark of the ole torches and walla!!!
Factory floors!!!
Best of luck,
Casey
Junior User
Joined: Oct 1999
Posts: 55
Likes: 0
Rust replacment panels
>Lee,
> Haven't really
>seen anything I would consider
>acceptable.
>I fabricated some a couple of
>years ago. It's not as
>tough as one might think.
>If you want factory, try
>a salvage yard. I am
>local to a yard (in
>Ga.) that is loaded with
>ford pick ups.
>(it's a goldmine!)
>A quick spark of the ole
>torches and walla!!!
>Factory floors!!!
>Best of luck,
> Casey
> Haven't really
>seen anything I would consider
>acceptable.
>I fabricated some a couple of
>years ago. It's not as
>tough as one might think.
>If you want factory, try
>a salvage yard. I am
>local to a yard (in
>Ga.) that is loaded with
>ford pick ups.
>(it's a goldmine!
) >A quick spark of the ole
>torches and walla!!!
>Factory floors!!!
>Best of luck,
> Casey
Senior User
Joined: May 2000
Posts: 121
Likes: 0
Rust replacment panels
If you told the secret location in Georgia, you would have treasure in Heaven for being like Christ and loving your neighbor as yourself!
Trending Topics
New User
Joined: Jan 2001
Posts: 22
Likes: 0
Rust replacment panels
OOOHHH the guilt!!!
Question is, can I live with it?
YOU BET I CAN!!!!
You'll have to do a little better than that if you want the location of this honey-hole!! ;-)
Question is, can I live with it?
YOU BET I CAN!!!!
You'll have to do a little better than that if you want the location of this honey-hole!! ;-)
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
fishmanndotcom
Appearance & Dress-Up
4
Jul 15, 2003 09:58 AM
bigsnag
1973 - 1979 F-100 & Larger F-Series Trucks
10
Jan 15, 2001 07:29 PM
