Dana Axles
Thread Starter
|
Freshman User
Joined: Mar 2009
Posts: 28
Likes: 0
From: Illinois
Dana Axles
I have looked everywhere I think and am coming up virtually empty on decoding the axle tags i know my gears are 3.54 and thats about all i know what do the rest of the numbers mean or where can i go to figure this out. and do the tags tell me if its a 44 or a 60 my tags are.
Front axle 3.54 d8ta aec 610040-2
Rear axle 3.54 d7ta aeb 603883-3
Truck is a 78 F250 I-6 4spd. and the front axle is a high pinion
Any help with this is appreciated
Front axle 3.54 d8ta aec 610040-2
Rear axle 3.54 d7ta aeb 603883-3
Truck is a 78 F250 I-6 4spd. and the front axle is a high pinion
Any help with this is appreciated
Thread Starter
|
Freshman User
Joined: Mar 2009
Posts: 28
Likes: 0
From: Illinois
i think i answered my own question the front axle is a 44 standard axle
http://www2.dana.com/pdf/X510-
SD.pdf
Link is a darn good tool.
http://www2.dana.com/pdf/X510-
SD.pdfLink is a darn good tool.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
I have looked everywhere I think and am coming up virtually empty on decoding the axle tags i know my gears are 3.54 and thats about all i know what do the rest of the numbers mean or where can i go to figure this out. and do the tags tell me if its a 44 or a 60 my tags are.
Front axle 3.54 d8ta aec 610040-2
Rear axle 3.54 d7ta aeb 603883-3
Front axle 3.54 d8ta aec 610040-2
Rear axle 3.54 d7ta aeb 603883-3
Ford ID number: D8TA-AEC / Dana ID Number: 610040-2 = Dana 44-9F / 3.54-1 / non Limited Slip / Free Running Hubs / 3800 lb. Front Axle Capacity.
Ford ID Number: D7TA-AEB / Dana ID Number: 603883-3 = Dana 60 / 3.54-1 / non Limited Slip / 5300 lb. Rear Axle Capacity.
Thread
Thread Starter
Forum
Replies
Last Post
David Greenhalgh
1987 - 1996 F150 & Larger F-Series Trucks
13
Jan 7, 2016 04:54 PM
fdude64
Clutch, Transmission, Differential, Axle & Transfer Case
8
Jan 25, 2011 03:07 PM
