test mode.
Thread Starter
|
Tuned
Joined: Mar 2007
Posts: 305
Likes: 0
From: Havana Fla
test mode.
I have searched and cant find the link that was here on what all the steps are and what normal readings are when you hold down the trip reset button then start the truck. The odometer says TEST then gauge sweep, ect. Does any body have the link?
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
Do you have a different HEC module? That should be the same info for all 2002 upto 2005 with the CAN network. I was under the impression the CAN network screwed up the test mode. If you find a better website, please post it.
Cargo Master
Joined: Jan 2007
Posts: 2,243
Likes: 79
From: Roman Forest, TX
Here you go fireman pat. This is the thread that has the codes and a couple of more links to different sources. The good stuff starts on page 2.
https://www.ford-trucks.com/forums/6...indicator.html
https://www.ford-trucks.com/forums/6...indicator.html
