2003 explorer 2WD
Thread Starter
|
New User
Joined: Feb 2009
Posts: 4
Likes: 0
2003 explorer 2WD
Cruise control does not work. Indicator light comes on in dash and will go off if you tap the brake pedal or slow to 30MPH. Brake pressure switch checks out okay. The VSS must be working or the light wouldn't turn off at 30MPH. Need to know how to test the servo, if that is the problem.
Any idea?
Any idea?
Thread Starter
|
New User
Joined: Feb 2009
Posts: 4
Likes: 0
cruise control won't engage
Got a copy of the TSB which decribes entering the self-test mode. It would not start the test. I had previously checked voltage output from the crusie control deactivator switch and it was okay. Decided to check resistance and found ~ 185 ohms. The same switch on my 200 Ranger read ~ 1 ohm. A paper clip jumper on the harness allowed the cruise control to engage again. A new $15.00 switch will replace the paper clip. Tks.
Thread
Thread Starter
Forum
Replies
Last Post
test1328
1987 - 1996 F150 & Larger F-Series Trucks
6
Nov 13, 2014 03:56 PM
