Hi everyone
I recently started re-doing the wiring on my 82' F250 and I cant seem to find any information on how to wire that little black box known as the wiper control delay. It has 6 wires coming out of it, it looks like the previous owner never used the yellow or the blue wire, the red and the black are obviously power and ground, it looks like there is a white wire coming from the box and going to the dimmer switch (which I have connected), and finally there appears to be an orange wire which i have no clue what to do with. any help would be greatly appreciated...also a fuse block diagram would be very helpful. Thanks in advance

DieZel 2010

 

From the switch to the intermittent box;

Black/lightgreen
Black/white
Red
Darkblue/orange
White
Black/pink

Black from switch to ground.

Out of the intermittent box goes;
white to wiper motor
darkblue/orange to wiper motor
black/pink to wiper motor
Red to wiper motor
black/white to washer pump
black/lightgreen to power source which is a splice that goes to the ignition switch