Cylinder Wall
Thread Starter
|
New User
Joined: Jan 2009
Posts: 4
Likes: 0
Cylinder Wall
I have been having some problems with many issues on my 05 f150. The engine was pulled and the cylinders were looked at. They determined this...
The clearance from cylinder wall to piston skirt is .003".
The build specification provided is .0015".
The shop stated the noise was heard using a stethoscope at the #2 cylinder
Is normal for a truck with 58,000 miles?
All the help is greatly appreciated since ford and my warranty company can't help me out.
Also, they can't figure out why the back of the truck is bouncing up and down at speeds around 50mph. Can anyone help me with that?
Thanks everyone.
The clearance from cylinder wall to piston skirt is .003".
The build specification provided is .0015".
The shop stated the noise was heard using a stethoscope at the #2 cylinder
Is normal for a truck with 58,000 miles?
All the help is greatly appreciated since ford and my warranty company can't help me out.
Also, they can't figure out why the back of the truck is bouncing up and down at speeds around 50mph. Can anyone help me with that?
Thanks everyone.
Thread
Thread Starter
Forum
Replies
Last Post
redman84
1994.5 - 1997 7.3L Power Stroke Diesel
17
May 29, 2013 12:38 PM
RANGER589
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
18
Jun 3, 2011 10:03 AM
