help help help help help help
02-03-2009, 06:32 PM
Post Fiend
Thread Starter
Join Date: Oct 2008
Location: concord ca
Posts: 8,513
Likes: 0
help help help help help help
i got a problem truck dint shut after i turned off the key i hade to uplug the ip it get it to stop help
but it did chager
02-03-2009, 06:42 PM
Join Date: Nov 2003
Location: Nutter Fort, WV
Posts: 21,285
Likes: 0
Somehow you are having power bypass the switch.
red/green wire is the ignition circuit from the switch.
And that wire does run near the voltage regulator.
02-03-2009, 06:44 PM
Post Fiend
Thread Starter
Join Date: Oct 2008
Location: concord ca
Posts: 8,513
Likes: 0
i put everything back the way it was to begin with i evan check some of my videos and picks
02-03-2009, 10:48 PM
Join Date: Nov 2003
Location: Campbell River, B.C.
Posts: 6,900
Likes: 0
What ever happened to that temperature sensor that was putting power to the IP? is that still connected to 12V?
02-03-2009, 11:10 PM
Post Fiend
Thread Starter
Join Date: Oct 2008
Location: concord ca
Posts: 8,513
Likes: 0
i replaced that allready before the allnator
02-03-2009, 11:46 PM
Join Date: Nov 2003
Location: Campbell River, B.C.
Posts: 6,900
Likes: 0
But is there 12V at that sensor with the ignition off? There should not be.
02-04-2009, 12:05 AM
Post Fiend
Thread Starter
Join Date: Oct 2008
Location: concord ca
Posts: 8,513
Likes: 0
i dont know i was more worry about how do i get this thing to turn off
02-04-2009, 12:20 AM
Join Date: Nov 2003
Location: Campbell River, B.C.
Posts: 6,900
Likes: 0
Thats the first thing to check then.
Also, is your ignition key loose? Did you try turning the key all the way back to the accessory position?
02-04-2009, 12:23 AM
Post Fiend
Thread Starter
Join Date: Oct 2008
Location: concord ca
Posts: 8,513
Likes: 0
ya i even locked up the steering
02-04-2009, 11:47 AM
Join Date: Apr 2008
Posts: 4,802
Likes: 0
Ignition switch is actually under the dash, read my post in the other thread.