Hello from Northern IN
Thread Starter
|
New User
Joined: Jan 2009
Posts: 6
Likes: 0
Hello from Northern IN
First of all I'd like to say thanks for the big help this site has been for me today. Yesterday I attempted to change ball joints for the first time. After following my Haynes manuel for most of the day and I only had my upper changed yet.
This morning I stumbled across this site and found a tech article that helped a lot.
Now I'm wondering, would I be stupid changing the driver side also even if they don't seem real bad. The parts cost around $180 for both sides.
This morning I stumbled across this site and found a tech article that helped a lot. Now I'm wondering, would I be stupid changing the driver side also even if they don't seem real bad. The parts cost around $180 for both sides.
New User
Joined: Jan 2009
Posts: 13
Likes: 0
Welcome to the site, I am new here too, and wow, also from northwest Indiana...
weird huh? Anyway...
change them both...
Most likely if one side is bad, the other will be right behind it.
Its like putting brakes on only the drivers side...
weird huh? Anyway...
change them both...
Most likely if one side is bad, the other will be right behind it.
Its like putting brakes on only the drivers side...
Thread
Thread Starter
Forum
Replies
Last Post
fabmandelux
General NON-Automotive Conversation
33
Oct 3, 2010 05:10 PM
