am working on redoing the windshield washer for the 53-56 trucks. Anyone out there with a complete system or any ideas. I have one foot pump, a couple jar brackets and a squirter. Thanks for any help. Sy
And THANKS for all the referals!!!

Will be at the HotRod & Restoration show this March in Indianapolis, still have family there so will be great time, if anyone is going I hope to see you there.

Thanks again,
Sy

 

Hello Sy,

I see one on e-bay about every week. I bought mine from a guy who has a bunch of them and after talking to him he sent me one that was NOS and a foot pump besides (whihch was not even part of the auction. I had to put some late 50s T-Bird nozzeles on my cowl to replace the cheezy aftermarket plastic broken garbage the PO put on there, and it works great!

Here's a picture. It's not great (because the overdrive and hood cables are still coiled up next to the fire wall).



Good Luck,
Julie

PS Here's a couple on e-bay - BOY DID I GET A GREAT DEAL AT $75!!!!

http://cgi.ebay.com/ebaymotors/1949-...QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/1952-...2em118Q2el1247

http://cgi.ebay.com/ebaymotors/NOS-1...2em118Q2el1247

http://cgi.ebay.com/ebaymotors/Vinta...QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/1955-...QQcmdZViewItem

 

I have a complete NOS FoMoCo "See Clear" windshield washer assembly available for sale. It's marked for a 1956 truck. I was going to use it on my 52 truck, but I found another correct NOS FoMoCo assembly (the jar type). PM or email me if you're interested. My price is a lot less than the eBay prices.

 

HAPPY DANCE !!!!!!!!! Yes, Yes, Yes, please let me know how much. You guys are so great, look at all this help. If I knew how to put a happy face blowing you kisses it would be right here **

 

Just click on "Go Advanced" below your reply and the "Smilies" are on the right.

Good Luck,
Julie

 

The foot pumps were used on many Ford cars (thru 1966) & trucks.

Lots of these around: 1957 thru 1991 C Series Tilt Cabs used this same pump.

 

[QUOTE=51PanelMan;7045312]I have a complete NOS FoMoCo "See Clear" windshield washer assembly available for sale. It's marked for a 1956 truck. I was going to use it on my 52 truck, but I found another correct NOS FoMoCo assembly (the jar type). PM or email me if you're interested. My price is a lot less than the eBay prices.

Very interested, please let me know how much but please consider it sold, Thanks again. Sy

 

Sy,

Just sent you an email through this forum. Please reply.

Thanks

 

I am sorry, did not see the price on first email. Just send address and the "check will be in the mail" Thanks so much, am very happy to get a complete set up. Thanks again

 

Also, you mentioned you found the correct Jar type, was the foot pump the same??

 

I will check and get back to you.

 

Here's a picture of the foot pump.



And here's a picture of the assembly and box.

 

Not trying to hijack this thread but does someone have a picture to show where the nozzles were located and if they were attached to the hood, I have a forward tilt hood and I'm wondering what problems I'm going to incounter. Glad to hear that someone on here was able to help you SY and looking forward for you starting a gallery, being up here in Canada I don't know if I'd ever get the chance to see your store, and thanks for all the parts you supply.