2WD Leveling
Thread Starter
|
Junior User
Joined: Dec 2008
Posts: 89
Likes: 0
From: METAIRIE, LOUISIANA
2WD Leveling
After I get my turbo squared away, I would like to invest in a 2WD leveling kit to cure my sagging front end blues. I seem to have a hard time finding one. Plus, if any 2WD guys out there have a front leveling kit on their truck, how does it look, how hard is it to install, and whats it ride like? 
Thanks in advance and HAPPY STROKIN' !!!!!!!!!!
Thanks in advance and HAPPY STROKIN' !!!!!!!!!!
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
Don't know how it would look, but it shouldn't be too hard to install. I believe it's just a spacer that goes above or below the coil. I replaced my front coils when they started to sag. A couple of jacks and a socket set is all you should need.
Cargo Master
Joined: Apr 2007
Posts: 2,333
Likes: 1
From: St. Louis, Mo.
I installed a 2" spacer set awhile back. They go under the springs and makes the front just about the same height as the rear. Looks great and rides real good. Did have to get it re-aligned after the install. Camber was out about 3 degrees. My neighbor(a mechanic) did the install and the alignment for me so I cant say how hard it was.Did'nt take him too long. Got the spacers off of fleabay.
