1985? F600 Wheel Torque?
Postmaster
Joined: Aug 2006
Posts: 2,829
Likes: 3
Not sure how much things changed over the years, but '92 is as far back as I have been able to find so far. Not sure if this will help or not...
1992 Wheel Torque Specs...
Disc Wheel Nut 3/4 in - 16 = 450-500 lb-ft (602-677 Nm)
Cast Wheel Rim Nut 3/4 in - 10 = 240-260 lb-ft (325-352 Nm)
Two-Piece Integral Wheel Nut (8-Hole ISO Disc Wheel) 20 mm X 1.5 = 280-330 lb-ft (380-450 Nm)
Two-Piece Integral Wheel Nut (10-Hole ISO Disc Wheel) 22 mm X 1.5 = 400-450 lb-ft (535-602 Nm)
1992 Wheel Torque Specs...
Disc Wheel Nut 3/4 in - 16 = 450-500 lb-ft (602-677 Nm)
Cast Wheel Rim Nut 3/4 in - 10 = 240-260 lb-ft (325-352 Nm)
Two-Piece Integral Wheel Nut (8-Hole ISO Disc Wheel) 20 mm X 1.5 = 280-330 lb-ft (380-450 Nm)
Two-Piece Integral Wheel Nut (10-Hole ISO Disc Wheel) 22 mm X 1.5 = 400-450 lb-ft (535-602 Nm)
Thread Starter
|
New User
Joined: Dec 2003
Posts: 4
Likes: 0
Thanks Guys,
Went and seen local big rig repair shop, shop manager he told us that they call for 500-550 ft lbs but to drop to 425 ft lbs or we would have trouble with breaking studs when driving and thats what was happening and it was being torqued at local tire shop to high (go figure) so now has all new studs and proper torque so we will see how it goes.
Thanks Again
Went and seen local big rig repair shop, shop manager he told us that they call for 500-550 ft lbs but to drop to 425 ft lbs or we would have trouble with breaking studs when driving and thats what was happening and it was being torqued at local tire shop to high (go figure) so now has all new studs and proper torque so we will see how it goes.
Thanks Again
Thread
Thread Starter
Forum
Replies
Last Post
art015
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
Jul 11, 2008 02:56 PM
9Volt
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
Jul 9, 2002 06:57 AM
