SWAY BARS....
Thread Starter
|
New User
Joined: Aug 1999
Posts: 21
Likes: 0
SWAY BARS....
YES ITS ME AGAIN.I AM IN THE PROCESS OF PUTTING EVERYTHING BACK ON MY FRAME.(FINALLY)I BOUGHT A PAIR OF SWAY BARS FOR IT,AND HAVE A STUPID QUESTION,READY?? O.K. SINCE THERE IS NO WEIGHT ON THE FRAME CAN I PUT THE FRONT SWAY BAR ON WITHOUT IT BINDING UP ONCE ALL THE WEIGHT IS BACK ON IT?I DONT KNOW IF IT MATTERS OR NOT??
Posting Guru
Joined: Jun 1999
Posts: 1,525
Likes: 1
SWAY BARS....
It is recommended that you wait to fully tighten the end links after the weight is on the wheels,on the ground.As a matter of fact, this applies to all suspension bushings that have been replaced or loosened. That way, the vehicle is at normal ride height when the bushing sleeve is squeezed in between its perches.
Phillip
Phillip
