302 head on 351W?
Thread Starter
|
Senior User
Joined: Aug 2003
Posts: 239
Likes: 2
302 head on 351W?
Last month the head on my '94 351W cracked and I was wondering if a head from a '92 302 will work and what if anything I need to do to make it fit?
I was told to drill out the bolt holes to 1/2" and it'll bolt right on? Is this good information and can I do this by hand at home?
Thanks!
- Rad
I was told to drill out the bolt holes to 1/2" and it'll bolt right on? Is this good information and can I do this by hand at home?
Thanks!
- Rad
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Yes this is accurate info, the head will bolt right on after you bore out the bolt holes. Be sure to get one from the same side of the motor so the air injection hole is at the back and the smaller threaded holes for the accessory brackets are at the front.
